Searching for a shade sail that can provide UV protection and resist strong winds? Discover the Australe 220 model, a shade consisting in a sail of perforated canvas, which protects from the sun and is also resistant faced with strong winds. This simple and stylish sail will blend in perfectly with your outdoors in a continuity of your indoor decor
With its micro-aired fabric, the 220g/m² high density polyethylene Australe 220 shade sail resists to 60-80km/h winds as well as protecting from 90 to 95% of UVs.
This shade sail is practical for a day-to-day use with its stainless steel snap links at each angle that allow a fast installation and disassembly of your sail.
The Australe 220 offers our bigget range of sail dimensions: 6 triangles, 5 rectangles and 3 trapeziums.
*To get a complete assembly kit with wall fixtures and/or masts, check the tab "additional products" below or click here.
The fabric of the Australe 220 solar sail is made with high-density polyethylene. Guaranteed 2 years, it provides:
The Australe 220 sail is shipped with a nautical stainless steel snap hook at each angle for a fast installation and disassembly. Nautical stainless steel is unalterable and has excellent traction resistance.
The sail filters sunbeams while allowing sunlight to pass through. By eliminating glares, it guarantees an optimal visual comfort as well as a highly efficient solar protection.
Shade sails stop direct sunbeams on walls and glass surfaces and avoid overheating the exposed rooms. The sails act as a genuine natural conditioner.
The Australe 220 sail can be permanently installed during the summer season, as well as mid-season if the weather is adequate. It supports weather aggressions very well thanks to its rot-proof and anti-stain fabric. The sail must only be removed during the winter and in very strong winds.
The design of the sails with their hems is suitable for use without direction of installation: hems above or below to allow the sails to be installed and to fit with several situations.
Very easy to maintain, the sail is washable with soap and water and no pressure.
3,60 x 3,60 x 3,60m (4,85m2)
5 x 5 x 5m (8,30m2)
3 x 4 x 5m (5m2)
4 x 4 x 5,66m (6,75m2)
4 x 5 x 6,40m (8,35m2)
5 x 5 x 7,07m (9,10m2)
3,00 x 4,00m (10m2)
3,00 x 5,00m (12,30m2)
4,00 x 5,00m (17,20m2)
3,60 x 3,60m (10,90m2)
5,00 x 5,00m (21m2)
4,00 x 3,00 x 4,00 x 5,50m (13,25m2)
3,50 x 3,50 x 4,50 x 4,50m (11,8m2)
3,50 x 3,50 x 4,73 x 4,73m (13,70m2)
The attachment points must always be placed following the sail diagonals (medians for triangles):
Plan at least 45cm margin in these diagonals so that the fixtures exert enough tension.
The shade sail sides are curved. This allows an adequate tension for the sail without creases.
The size of the shade sail can vary up to +/-5% with the given size due to the elasticity of the fabric, the fabrication process, and the tension brought to the sail.
Sail size
Triangle
3,60 x 3,60 x 3,60
3 x 4 x 5
4 x 4 x 5,66
4 x 5 x 6,40
5 x 5 x 5
5 x 5 x 7,07
Quadrilateral
3 x 4
3,60 x 3,60
3 x 5
4 x 5
5 x 5
4 x 3 x 4 x 5,5
3,5 x 3,5 x 4,73 x 4,73
Min. width of the terrace
Width
4,60
5,40
5,05
6,15
6,00
6,15
Width
3,75
4,60
3,75
5,00
5,90
6,40
5,40
Min. depth of the terrace
Depth
3,90
3,60
5,05
4,95
5,00
6,15
Depth
5,00
4,60
5,90
5,90
5,90
4,40
5,40
The Australe 220 is available in 13 formats: 6 triangles and 7 quadrilaterals. Plan a smaller sail than your deck to be able to integrate tension distances at each corner (see table summarizing the minimum dimensions of the deck for each sail format).
The density of a shade sail or its weight is mentioned in square meter. The Australe 340 weighs 340g per sqm, while the Australe 220 sail has a density of 220g/sqm. The UV filtration is superior with the sail Australe 340.
Other question? Check our FAQs
Want to see more? Check out our achievements
