- Shipping time within 48h
- Fixtures included
- 3 colours
Have a promo code?
Long wall fixture
- Shipping time within 48h
- Multiplies the force
- Inox 316
This attachment allows you to fix a corner of your shade sail to a wall.
It leaves a gap between the fixing point and the sail of 45 cm to 250 cm.
With its nautical rope and pulleys, it is ideal for giving your sail a nautical look and providing excellent tension.
The nautical system allows you to set up and take down your sail quickly and easily.
Type of mounting: Wall mounted
Range: from 45 to 250cm
Weight: 500g
Material: 316 stainless steel and rot-proof nautical rope
Warranty: 2 years
Contents of the bracket
Reinforced fasteners are essential for Acryl 300 and Australe 340 shade cloths with heavier fabrics.
They contain double pulleys adapted to the karabiners of the latter which facilitate the tensioning of the sail and make the installation more resistant.
- 1 expanded dowel
- 1 eyebolt
- 5m of black rope (10m for the reinforced version)
- 1 set of single pulleys (double for the reinforced version) and a shackle.
- 1 jumper
- 4 screws
- 5m of black rope (10m for the reinforced version)
- 1 set of single pulleys (double for the reinforced version) and a shackle.
Depending on your installation choices, you will also need additional products.
- Shipping time : From 1 to 2 weeks
- 300 g/m²
- Waterproof
- Shipping time : From 1 to 2 weeks
- Wind: 80km/h
- 340 g/m²
- Shipping time within 48h
- Finishing element
- Screw-on
- Shipping time within 48h
- Chemical seal
- Wall fixture
Installation of the wall mount
For the concrete version:
- Drilling diameter: 14mm
- Drilling depth: 80mm
Anchors for solid or hollow materials:
We have selected the PRIMA plug from SPITZ, a world leader in the fastening industry. This plug is suitable for solid and hollow walls.
The expansion technique is well proven and provides full satisfaction in its use. We recommend to follow the different installation steps of this anchor (see sketch).
Before inserting the anchor into the hole, it is important to make sure that the anchor can be fully inserted into a hole the size of the anchor.
The hole should not be too large, otherwise the plug will not expand in the substrate, as it will turn on itself in the hole.
The fixings should always be in line with the diagonals or medians of the shade sail
Discover the manuals of this product
Our users' opinion
What about discovering other products?
- Shipping time : From 1 to 2 weeks
- 300 g/m²
- Waterproof
- Shipping time within 48h
- 200 g/m²
- Waterproof
- Shipping time : From 1 to 2 weeks
- 300 g/m²
- Waterproof
- Shipping time : From 1 to 2 weeks
- 340 g/m²
- 5 yrs guar. fabrics
- Shipping time within 48h
- Wind: 60 to 80km/h
- 220 g/m²
The M6 carabiner is supplied with the Australe 220 and Solar 200 sails and is suitable for use with standard long fasteners. The M8 carabiner is supplied with the Australe 340 and Acryl 300 sails and is suitable for reinforced long bindings. The M8 carabiner is not suitable for standard long fasteners.
We recommend that you lay your sail on the ground with the seams facing downwards so that the sail's attachment points are well positioned in the tension axes. Installation tutorials are available on the Espace Ombrage YouTube channel.
Other question? Check our FAQs