Different colors of matting for shade cloth

4 Adjustable poles

Shipping time within 48h
Reinforces the mast
3 colours

Tension system of the mast

Base type

3 available colors

Quantity

Configuration Description Details Additional products Installation Reviews

4 Adjustable poles

€1,196.00

Tax incl.

996.67 € tax excl.

Shipping time within 48h

Set of 4 adjustable poles for shade sails

Like the 3-mast kit, this kit with 4 adjustable masts is ideal for installing a shade sail exclusively between masts. This avoids the need for wall fixings.

Description

Characteristics of the mast

Description

This set of 4 adjustable poles guarantees a strong and stylish installation. Thanks to these 4 poles, you can install a shade sail anywhere you want. New version "V2" on sale since 10 April 2020.

Practical: they are removable: remove them easily in winter. Good to know: Tensioning systems included

Characteristics of the mast

Pole material: Durable (recycled) aluminium, robust and weatherproof

Height: 260 cm

Diameter: ovoid (110 x 80 mm)

Weight: 12 to 20 kg depending on the base

Warranty: 2 years

Made in Europe

Elements included in the shade sail fixing kit

Tension system

To tension the sail correctly. Single pulleys for the standard version, double pulleys for the reinforced version or a tensioner for the short version.

The slide

To adjust the height of the fixing point of your shade sail in a few seconds along the entire length of the mast.

The cleat

For winding the rope onto the mast and getting a clean and tidy installation at all times.

In addition, there is a pole attachment (according to your choice)

Base to be sealed

In the version to be embedded, the ovoid sleeve to be embedded in concrete is 40cm high. The ovoid pole fits entirely into the sleeve, so to have a 260cm high pole, we deliver a 300cm profile + a 100cm reinforcement which ensures the solidity of the pole.

Material: recycled aluminium. You can increase the strength of your mast by positioning it at an angle.

Screw-on base

For hard floors such as concrete slabs or terraces with wooden joists. 2 versions: vertical or inclined. The tube measures 50cm.

Material: Galvanised steel. You can complete your installation with a base cover which will cover the screw-on plate, its threaded rods and bolts. This product is optional and will finish your installation on your terrace. The screw-on base can be fixed on a ballast support to avoid any drilling.

Adjustable wall plates

For leaning the pole against a wall, when it is not possible to fix to the ground. You will receive a set of bolts and nuts as well as two wall plates with rings in which the pole will be inserted. The plates are adjustable to fit the tensioning axes of the sail(s).

Material: 316 stainless steel. M10 threaded rods and a chemical sealant are required to ensure the robustness of the installation.

Depending on your installation choices, you will also need additional products.

Spot

Shipping time within 48h
Adapted to the mast
Height adjustable

€59.00

Acryl 300 shade sail

Shipping time : From 1 to 2 weeks
300 g/m²
Waterproof

€299.00

Australe 340

Shipping time : From 1 to 2 weeks
Wind: 80km/h
340 g/m²

€269.00

Protective cover

Shipping time within 48h
Waterproof
Wintering

€25.00

Set of 4 threaded rods

Shipping time within 48h
Guarantee: 2 years
Screw-on

€13.00

Installation of an adjustable mast with adjustable height

Bases for sealing

Screw-on bases

Adjustable wall plates

Bases for sealing

Step 1: Create a concrete mass 60 to 80 cm deep and about 40 cm in cross-section in which the ovoid sleeve will be embedded. The larger the foundation, the greater the stability of the mast.

Step 2: Then insert the 100 cm galvanised steel reinforcement into the sleeve and the profile.

Here is a video explaining the assembly of the mast to be embedded:

Screw-on bases

Step 1: Provide 4 bolts and 4 threaded rods of 12 mm diameter and 150 to 200 mm length to fix the base. Drill with a 14 mm concrete drill bit and make a chemical seal.

Step 2: Simply slide the pole onto the base. Add a plate cover (available as an accessory) to get a neat look.

Here is a video explaining how to assemble the screw-in mast:

Adjustable wall plates

Step 1: Provide 4 nuts and 4 threaded rods with a diameter of 8 to 10 mm and a length of 100 mm to fix the 2 plates (2 anchoring points per wall plate).

Step 2: Ensure a minimum distance of 70 cm between the 2 plates. Make a chemical seal. Simply insert the mast into the two plates.

Here is a video explaining the assembly of the mast with wall plates: